97 Civic LX Sedan Power Window Issue Need help

DrTran · 05-24-2010, 10:15 PM

Hey whats up guys I just bought this 97 Civic LX and I am having issues with the power windows. I didn't notice the windows was like this till today. But the main switch the driver window was rigged to the passenger window so it only operates pushing the the right switch on the main switch. I tested and and probed the wires that was cut and both wires are putting out 12v when I hit the switch. Also the passenger side rear window is not working either. I am not sure why this is working when jumped to the passenger side switch and then not working when it is when it is where it is suppose to be. I changed out the relay below the dash tested each fuse and also changed out each fuse. I've read a few post about people changing out the door harness for the driver door but I am not to keen on going to the junk yard unless I have to. I am reading in the service manual and talks about a window pulsar where is that located at?

Ek9Hmmm. · 05-25-2010, 01:03 PM

how about the main switch?

DrTran · 05-26-2010, 12:34 AM

I just swap out the main switch the only window that doesn't work in the passenger rear now but whats weird is both passenger side window switches don't work still.

Ek9Hmmm. · 05-26-2010, 08:37 AM

if i could see the car i could probably figure it out for ya... but look at the fuse box area to see if all the wires is uncut

DrTran · 05-30-2010, 11:52 PM

Probably start working on this car again on Weds.

Ek9Hmmm. · 06-01-2010, 02:00 PM

lol just throw the damn thing away and get the el muhahahah

05-24-2010, 10:15 PM	#1
DrTran Join Date: Feb 2007 Posts: 786	97 Civic LX Sedan Power Window Issue Need help Hey whats up guys I just bought this 97 Civic LX and I am having issues with the power windows. I didn't notice the windows was like this till today. But the main switch the driver window was rigged to the passenger window so it only operates pushing the the right switch on the main switch. I tested and and probed the wires that was cut and both wires are putting out 12v when I hit the switch. Also the passenger side rear window is not working either. I am not sure why this is working when jumped to the passenger side switch and then not working when it is when it is where it is suppose to be. I changed out the relay below the dash tested each fuse and also changed out each fuse. I've read a few post about people changing out the door harness for the driver door but I am not to keen on going to the junk yard unless I have to. I am reading in the service manual and talks about a window pulsar where is that located at? __________________ "Your shit is WACK!"

05-25-2010, 01:03 PM	#2
Ek9Hmmm. Join Date: Apr 2010 Location: ACC,Texas Posts: 47	how about the main switch? __________________ hmmm. Purple

05-26-2010, 12:34 AM	#3
DrTran Join Date: Feb 2007 Posts: 786	I just swap out the main switch the only window that doesn't work in the passenger rear now but whats weird is both passenger side window switches don't work still. __________________ "Your shit is WACK!"

05-26-2010, 08:37 AM	#4
Ek9Hmmm. Join Date: Apr 2010 Location: ACC,Texas Posts: 47	if i could see the car i could probably figure it out for ya... but look at the fuse box area to see if all the wires is uncut __________________ hmmm. Purple

05-30-2010, 11:52 PM	#5
DrTran Join Date: Feb 2007 Posts: 786	Probably start working on this car again on Weds. __________________ "Your shit is WACK!"

06-01-2010, 02:00 PM	#6
Ek9Hmmm. Join Date: Apr 2010 Location: ACC,Texas Posts: 47	lol just throw the damn thing away and get the el muhahahah __________________ hmmm. Purple

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode